Kydex® 130 Decorative Thermoplastic Sheet – A new dimension to thermoplastic sheet is now available. Kydex 130 Granites Series offers a look which is unique to most thermoplastic materials. This decorative product performs equally well as a flat sheet or as a 3-dimensional thermoformed part. It is available in 5 colors: green, black, navy, red/black, and rosetone. It is Underwriter’s Laboratories Inc. recognized UL 94 V-0 and 5V in all gauges and UL Classified Class I/A for non-wallcovering building product applications.
• In-Store Displays
• Medical Devices
• Equipment Housings
• Dental Equipment
SUPERIOR FORMABILITY – For deep or hard to form parts or where good finished detail is required, Kydex 130 is unsurpassed.
RIGIDITY – Kydex 130 is more rigid than most other thermoplastics resulting in parts that are stiffer and that will deform less when loaded.
CHEMICAL RESISTANCE – Kydex meets the highest standards for chemical resistance.
FIRE RETARDANCY – Kydex 130 is recognized by Underwriter’s Laboratories for Std 94 V-0 and 5V in all gauges. It meets FAR 25.853(a) vertical burn requirements for use in aircraft as thermoformed parts. For building products its Surface Burning Characteristics meets Class I/A requirements
Kydex 130 is easy to fabricate and thermoform and since the color is integral throughout the sheet you don’t have to worry about the cap thinning out or the substrate bleeding through.
|PROPERTY||TEST METHOD||TYPICAL VALUE1|
|Specific Gravity||ASTM D-792||1.33-1.37|
|Tensile Strength, psi (MPa)||ASTM D-638||6.000 (41)|
|Elongation at Break, %||130|
|Flexural Strength, psi (Mpa)||ASTM D-790||9,000 (62)|
|Modulus of Elasticity, psi (MPa)||344,000 (2372)|
|Rockwell Hardness, R||ASTM D-785||101|
|Notched Izod Impact Resistance, 73°F (23°C),ft-lbs/in (J/m)||ASTM D-256||3.5 (187)|
|Heat Deflection Temperature, HDT, @264psi (1.8 MPa), annealed,°F (°C)||ASTM D-648||170° (77°)|
|Flammability Resistance2: Underwriter’s Lab.||UL Std 94||V-0/5V|
|Flammability Resistance2: Federal Aviation Admin.||FAR 25.853||Pass|
|Surface Burning Characteristics, < 0.060″ (1.52mm)||UL Std 723||Class I/A|
|Forming Temperature, °F (°C)||325°- 390°
|1All values based on 0.125″ (3.12mm) sheet unless otherwise specified.
2All gauges from 0.028″ (.71mm) and greater. Not intended for specification purposes.
Full-service plastics fabricator and supplier of plastic materials
Norva Plastics has been a full-service plastics fabricator and supplier of plastic materials. With over half a century in the business, we can tackle just about any job with confidence that comes from experience. From a tough prototype to long-run production, whatever your requirement, contact the experienced plastics fabricators first at Norva Plastics.
Norva Plastics provides many services relating to plastics and similar materials. We have 3 high precision CNC machines in house to handle high production jobs or for quick prototype jobs. We also do custom fabrication and also offer vacuum forming services. So contact us now! We look forward to serving you.